Coppell TV Repair LLC offers you a repair kit for a common problem experienced by power supply board EAY41360901 used in LG 50PG20-UA and other plasma display TVs and shown on the picture.
Failure symptom addressed by the kit, repair task difficulty level and other related and important information can be found below.
As with all repairs please note that we can never guarantee that this kit is all that is needed to fix the TV. It is offerred based on experience and technical information available to Coppell TV Repair at the time of the listing. For details please see the warranty conditions section below.
Failure symptoms
TV is totally dead, no power and can not be turned on with neither buttons nor remote.
Fuse F801 located above and to the right of the two AC line coils usually blown open; transistor Q801 or/and transistor Q802 usually shorted.
Difficulty level
Basic to intermediate soldering skills level and consumer electronics grade soldering iron required to perform the repairs.
Kit tested by Coppell TV Repair
Yes.
Repair service offerred
Please check our store for board repair or board replacement offers and availability.
Notes
1) As with all power supply boards please exercise caution and allow the board 5-10 minutes after disconnecting from power before starting to work on it!
2) Once applied to a board the kit does not have any warranty! We use only brand new parts, but we can't give warranty for them unless we do the service.
